
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X35-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 35mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X35-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a carbon steel piston rod and a PT tapered port thread. Because this specific SKU carries the -S magnet option, it is fully primed for use with AirTAC CMSE reed and DMSE solid-state electronic sensors, which seat directly into the dual-side extruded aluminum barrel grooves.
With a nominal 35 mm stroke and a 30 mm adjustment range, this actuator provides a highly compact 5-35 mm usable travel window. This allows operators to dial in exact end-of-stroke positions at commissioning without adding external stops.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in new retract end-stops for varying component sizes on a packaging line without disassembling the machine or adding external mechanical shims.
Fine-tune clamping pressure and travel distance within the 5-35 mm window during machine commissioning to prevent part deformation.
Leverage the integrated -S magnet with DMSE electronic sensors to verify exact positioning across the adjusted travel range.
Select this 40 mm bore adjustable-stroke cylinder when an application demands precise retract-end tuning within a very tight physical envelope. The 30 mm adjuster on a 35 mm nominal stroke lets you vary the effective travel down to 5 mm, which is ideal for product changeovers on a conveyor line where a fixed-stroke SAI cylinder would require physical shimming or swapping. If your force requirements are lower, stepping down to a 32 mm bore yields 402 N at 0.5 MPa; if you need significantly more thrust, a 50 mm bore provides 982 N.
When replacing an ISO 15552 cylinder, match the 40 mm bore, the 35 mm nominal stroke, the 30 mm adjustment range, the PT port thread, and the -S magnet specification. The SAIJ series utilizes a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR mounting styles. Note that the rear adjuster acts purely as a travel stop to set deceleration and end position; it does not hold the load without live air pressure. For true fail-safe load holding, consider an SAIL air-released lock or BSAI clamp-lock cylinder instead.
Quick checklist
The rear adjuster screw acts as a mechanical stop that trims the retract stroke. For this model, the 30 mm adjustment range on a 35 mm nominal stroke provides a usable travel window of 5 to 35 mm, allowing precise end-position tuning without swapping the cylinder.
At 0.9 MPa, the push force increases to 1130 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.