
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X350-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 350mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X350-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The built-in rear stopper allows you to shorten the effective travel from its 350mm nominal length down to 300mm, creating a precise 300-350mm usable window without bolting on external stops.
This 40mm bore profile cylinder features variable air cushions at both ends and uses a PT G1/4 tapered port. The rear adjuster acts purely as a travel stop for end-position tuning during commissioning or product changeover. It is not a locking device, meaning the cylinder cannot hold a load without live air pressure. For true fail-safe load holding, an external pilot-operated check valve or a related SAIL locking cylinder is required.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X350-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 300-350mm travel window during product size transitions on a packaging line without physically replacing the cylinder or adding external stopper blocks.
Set precise retraction endpoints for a conveyor diverting arm, allowing flexible positioning adjustments during equipment commissioning.
Trim the effective stroke by up to 50mm to perfectly time the end-of-travel position against a workpiece, preventing mechanical crushing.
Choose this adjustable-stroke model when your machine setup requires variable end stops or fine-tuning during product changeovers, avoiding the need to physically swap a fixed-stroke SAI cylinder. If you need more clamping power, a 50mm bore provides 982N.
When replacing an ISO 15552 cylinder, match the 40mm bore, 350mm stroke, 50mm adjustment range, PT G1/4 port, and your required mounting set. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR. Because this features a 350mm stroke, the 16mm rod and M12x1.25 thread will carry moderate side loads, but an external guide rail is recommended for long unsupported loads to prevent rod binding.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
A rear adjusting screw acts as an external stopper, allowing you to shorten the 350mm nominal stroke by up to 50mm. This creates a usable travel window of 300-350mm, enabling fine end-position tuning without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.