
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X350-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 350mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X350-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -S magnet enables position sensing with CMSE reed or DMSE electronic solid-state switches.
This 40mm bore utilizes a G1/4 port and a 16mm carbon steel rod with an M12x1.25 thread. Because the stroke extends to 350mm, the unsupported rod length increases; relying on the rod thread for alignment is not enough, so an external guide is recommended to handle side loads. The rear adjuster acts purely as a travel stop to fine-tune deceleration, not as a lock to hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X350-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 275-350mm travel window during format size changes on a packaging line, using the rear screw to set new end positions rapidly.
Trim the effective stroke by up to 75mm during machine setup to perfect the end-of-stroke deceleration without adding external mechanical stops.
Achieve precise endpoint tuning on automated assembly stations where multiple part sizes require slightly different actuation depths.
Select this adjustable-stroke model when your machine setup requires variable end-stops or commissioning fine-tuning without physically swapping cylinders or bolting on external stopper blocks. If your application needs less force, the 32mm bore provides 402N at 0.5 MPa; if you need more clamping power, the 50mm bore offers 982N.
To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 40mm bore, 350mm stroke, 75mm adjustment range, PT tapered port thread, and the -S magnet option. Note that SAIJ supports a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. If your design requires load-holding without continuous air pressure, use an external rod lock or pilot-operated check valve, or switch to the SAIL or BSAI series.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw acts as a mechanical stop that shortens the 350mm nominal stroke by up to 75mm, creating a 275-350mm usable travel window. It only sets the travel end and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.