
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X375-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 375mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X375-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 275 to 375 mm, allowing you to dial in the exact retract position during commissioning without adding external stops.
This model features a 16 mm carbon steel rod and M12x1.25 thread, paired with 30 mm air cushions at both ends to manage end-of-stroke kinetic energy. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. It supports a speed range of 30-800 mm/s and uses a PT tapered G1/4 port.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X375-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract stop from 275 to 375 mm to quickly adapt automated lines for different product lengths without swapping cylinders.
Fine-tune the exact retract position during initial commissioning using the rear adjuster, avoiding the need to bolt on custom external stops.
Choose this adjustable-stroke model over a fixed SAI when your end-position requires fine-tuning at machine setup or during product changeover. If your application needs less push force, stepping down to a 32 mm bore yields 563 N at 0.7 MPa; if you need more clamping power, a 50 mm bore provides 1374 N. The rear adjuster acts purely as a travel stop and does not hold the load without live air—use a SAIL pneumatic lock or BSAI clamp-lock cylinder for fail-safe load holding.
Because the 375 mm stroke creates a long unsupported rod length, an external guide is recommended to prevent excessive side loading and premature seal wear. When matching ISO 15552 dimensions, specify the 40 mm bore, 375 mm stroke, 100 mm adjustment, PT G1/4 port, and the required mounting accessory from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
It operates at speeds between 30 and 800 mm/s.
The rear adjuster screw acts as a mechanical stop, allowing you to trim the effective travel back from the 375 mm nominal stroke to any point within a 275 to 375 mm window. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.