verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X375-20

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X375-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 375mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke375 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$98.60 $106.10Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X375-20

The AirTAC SAIJ40X375-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 355 to 375 mm, allowing you to dial back the nominal stroke by up to 20 mm during commissioning.

This model incorporates a 16 mm carbon steel rod with an M12x1.25 thread, offering solid resistance to side loading. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE or DMSE switches. It uses a PT G1/4 port and relies on variable air cushions at both ends to decelerate the load smoothly.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X375-20 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X375-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke375 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X375-20

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×375Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X375-20 Is Used

settings_input_component

Variable End Stops

Dial in the exact 355-375 mm travel distance during machine commissioning to accommodate slight variations in product dimensions without changing hardware.

conveyor_belt

Product Changeover

Quickly adjust the retract position on packaging lines when switching between different package lengths, minimizing downtime between production runs.

tune

Setup Fine-Tuning

Fine-tune the final end-stop location at assembly stations to achieve perfect alignment, avoiding the need to machine custom spacer blocks.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X375-20 the Right Cylinder?

Select this 40 mm bore when an application requires precise end-position tuning without swapping cylinders or adding bulky external stops. For heavier payloads, a 50 mm bore provides 982 N. Since the stroke is 375 mm, an external guide rail is recommended to prevent rod wear from side loads over long travel distances.

This SKU is dimensionally interchangeable per ISO 15552 standards. To match this exact configuration, specify a 40 mm bore, 375 mm stroke, 20 mm adjustment range, PT G1/4 port, and carbon steel rod. It supports mounting sets Basic, FA, LB, TC, FTC, TCM1, and TCM2. Remember that the rear adjuster is a travel stop, not a lock; for load-holding without live air pressure, consider the SAIL or BSAI series.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X375-20 FAQ

At the maximum pressure of 1.0 MPa, it can deliver up to 128 kgf.

The rear adjusting screw acts as a mechanical stop that lets you shorten the effective stroke by up to 20 mm. This creates a usable travel window of 355 to 375 mm, allowing precise end-position tuning without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X375-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X375-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.