
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X375-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 375mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X375-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 345 to 375 mm, allowing you to dial back the nominal stroke by up to 30 mm during commissioning. The carbon steel rod uses an M12x1.25 thread, and the extruded aluminum barrel includes sensor grooves on both sides.
This model uses PT (tapered) port threads and lacks a standard magnet, meaning electronic DMSE or reed CMSE sensors cannot be fitted without modifying the configuration. The rear adjuster acts purely as a mechanical stop to set the end position and does not hold the load without live air pressure. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X375-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 345-375 mm travel window during initial commissioning or product size changes without physically replacing the cylinder.
Adjust the retract position on the fly to handle different package sizes on a packaging line without bolting on external stops.
Dial in the exact end-of-stroke location for clamping tasks where hitting a precise mechanical stop is critical for part quality.
If your application requires less force, stepping down to a 32 mm bore yields 402 N at 0.5 MPa. The 30 mm adjustment range is ideal for product changeovers on a line, letting you fine-tune the retract end position without swapping the cylinder or adding external stops. For load-holding without live air pressure, this plain SAIJ is insufficient; consider the SAIL (air-released lock) or BSAI (clamp-lock) series instead.
At 375 mm of stroke, the 16 mm diameter carbon steel rod carries a moderate side-load capacity, but long unsupported strokes still require an external guide to prevent binding. This SAIJ40X375-30 is dimensionally interchangeable per ISO 15552, uses a G1/4 port, operates at 30-800 mm/s, and includes variable air cushions at both ends measuring 30 mm.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 30 mm, providing a usable travel window of 345 to 375 mm. It acts as a mechanical stop to set the end position and does not lock or hold the load without continuous air pressure.
At 0.7 MPa, the push force increases to 879 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.