
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X375-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 375mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X375-50-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 325 to 375 mm, allowing you to dial back the 375 mm nominal stroke by up to 50 mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides, and because this is an -S variant, it carries a magnet for CMSE reed and DMSE electronic switches. The PT tapered port thread and carbon steel rod are standard.
Unlike a fixed-stroke SAI cylinder, this model lets you fine-tune the retract end-position without swapping hardware or adding external stops. The rear adjuster acts purely as a travel stop, meaning it decelerates the load alongside the adjustable air cushions but does not hold the load without live air pressure. For position holding, you would need a SAIL or BSAI variant. The M12x1.25 rod thread handles moderate side loads, but at 375 mm of travel, an external guide is recommended for unsupported loads.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X375-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 325-375 mm travel window during product size transitions without physically swapping the cylinder or adding external mechanical stops.
Adjust the retract position on the fly for sorting or diverting tasks on a packaging line, utilizing the 50 mm adjustment range for precise product handling.
Fine-tune the final end position during machine setup to avoid hard crashes, letting the rear stopper absorb the impact alongside the standard air cushions.
Choose this 40 mm bore when you need precise variable end-stops on product changeovers. The SAIJ40X375-50-S is dimensionally interchangeable per ISO 15552, featuring a G1/4 port, PT thread type, and a carbon steel rod. It supports a speed range of 30-800 mm/s.
Mounting options for this adjustable series are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets found on other types. Because the stroke is 375 mm, you must account for side-load dynamics; use an external guide to prevent rod damage and premature seal wear. This cylinder includes the -S magnet option for use with CMSE and DMSE sensors.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
The rear adjuster screw lets you shorten the 375 mm nominal stroke by up to 50 mm, creating a 325-375 mm usable travel window. The adjuster acts as a mechanical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.