
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X375-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 375mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X375-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. By turning the rear stopper screw, you can shorten the effective travel, providing a precise 300-375mm usable window for your end-position tuning.
This 75mm adjustment range allows for significant flexibility during machine commissioning or product changeovers without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed and DMSE electronic switches. The rear adjuster acts purely as a travel stop to set the end position, meaning it will not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X375-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 300 and 375mm to accommodate varying material lengths without changing the physical cylinder setup.
Quickly reconfigure the stroke length on a packaging line for different carton sizes by turning the rear adjuster screw during line setup.
Perfect the final end-position during machine installation to avoid mechanical crashes, compensating for minor variations in the mounting plane.
If your setup needs less force, the 32mm bore offers 402N; if you need more power, stepping up to the 50mm bore yields 982N. The 75mm adjustment range is perfect for accommodating varying product sizes on a single line. For load-holding without continuous air pressure, this cylinder is not a lock; you would need to look at the SAIL or BSAI series instead.
Because the 375mm stroke is relatively long, the 16mm rod and M12x1.25 thread provide robust support, but an external guide is still recommended to prevent excessive side-loading. This SAIJ model uses a PT tapered port thread and supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2. It is dimensionally interchangeable per ISO 15552 standards.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 375mm nominal stroke by up to 75mm, creating a usable travel window of 300-375mm. It only sets the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.