
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X40-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 40mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X40-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated rear stopper allows you to fine-tune the effective travel down to a 30-40 mm window, giving you exact end-position control without swapping components.
This 40 mm bore unit features a 16 mm carbon steel rod and M12x1.25 thread, offering robust resistance to side loads. It includes variable air cushions at both ends to decelerate the moving payload smoothly. Remember that the rear adjuster functions strictly as a travel stop and does not hold the load without live air pressure; for true position holding, consider the SAIL or BSAI series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X40-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 30-40 mm travel window during product size changes on a packaging line, using the rear stopper to set new end positions rapidly without changing the cylinder.
Fine-tune the retraction point during machine commissioning to hit exact mechanical stops, absorbing minor dimensional variances directly at the cylinder.
Choose this 40 mm bore adjustable model when your application requires precise 30-40 mm end-position tuning during commissioning or product changeovers, avoiding the need to bolt on external stops or swap a fixed-stroke SAI cylinder. If your process demands less force, stepping down to a 32 mm bore yields 402N at 0.5 MPa, while stepping up to a 50 mm bore provides 982N for heavier payloads.
To match this ISO 15552 cylinder for a direct replacement, verify the 40 mm bore, 40 mm nominal stroke, 10 mm adjustment range, PT G1/4 port, and the required mounting accessory from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that FB, CA, CB, and CR mounts are omitted from this adjustable series. Because the 16 mm rod carries side loads well, it is suitable for moderate guiding tasks, though unsupported strokes still require external guidance.
Quick checklist
If pressure is increased to 0.7 MPa, the push force reaches 879N.
The rear adjuster acts as a mechanical stop that lets you shorten the 40 mm nominal stroke by up to 10 mm, providing a usable travel window of 30-40 mm. It only sets the travel end and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.