
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X40-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 40mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X40-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear stopper screw, you achieve a precise 30-40mm usable travel window, enabling exact end-position tuning without swapping hardware.
This variant includes a built-in magnet for position sensing with CMSE reed or DMSE electronic switches. It utilizes PT tapered port threading (G1/8) and relies on variable air cushions at both ends to decelerate the load. Remember that the adjuster acts only as a travel stop, not a load-holding lock; for dead-air positioning, consider an external pilot-operated check valve or the SAIL series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X40-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 30-40mm travel distance during machine commissioning to perfect pick-and-place positioning without adding external stopper blocks.
Quickly adjust the rear screw to accommodate slight variations in incoming part sizes on a high-mix assembly line.
Trim the effective stroke by up to 10mm to prevent mechanical interference at the end of the retract cycle.
Select this 40mm bore when an application requires finer end-position control than a fixed SAI cylinder provides, saving setup time during product changeovers. If your process needs less force, the 32mm bore yields 402N at 0.5 MPa; for heavier payloads, stepping up to the 50mm bore provides 982N. To match this ISO 15552 footprint, specify the 40mm bore, 40mm stroke, 10mm adjustment, PT port, and the -S magnet option. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster screw lets you shorten the nominal 40mm stroke by up to 10mm, creating a 30-40mm usable travel window. This stopper only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.