
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X40-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 40mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X40-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because the adjustment range matches the nominal stroke, you can dial the effective travel down anywhere within a 0-40 mm usable window. This flexibility allows precise end-position tuning at commissioning without swapping the cylinder or adding external stops.
It includes variable air cushions at both ends to decelerate the load smoothly. Note that the rear adjuster acts only as a travel stop, not a lock, so live air is required to hold position.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X40-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 0-40 mm travel end-position during product line changeovers to accommodate varying package sizes without replacing hardware.
Dial in the exact retraction point for clamping or pressing tasks, using the rear screw to set the precise 0 to 40 mm stroke distance.
If you need less force, stepping down to a 32 mm bore yields 402 N; stepping up to a 50 mm bore provides 982 N. The SAIJ40X40-40 is selected over a fixed SAI model specifically for its 0-40 mm adjustable travel window, enabling rapid machine setup without mechanical rework.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 40 mm stroke, PT tapered port threads, and carbon steel rod. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. For load-holding without continuous air pressure, consider an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 128 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 40 mm. Since the nominal stroke is 40 mm, the usable travel window is 0-40 mm, letting you set the exact end position without external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.