
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X40-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 40mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Because the 40mm nominal stroke can be dialed back by up to 40mm, it provides a highly versatile 0-40mm usable travel window for exact end-position tuning. The extruded aluminum barrel features sensor grooves on both sides, and this -S variant includes a magnet for direct compatibility with AirTAC CMSE reed and DMSE electronic switches.
This model utilizes a standard carbon steel piston rod with an M12x1.25 thread and a PT tapered port. The rear adjuster acts purely as a mechanical stop to fine-tune the retract position during commissioning; it does not lock the load without continuous live air. For applications requiring position holding, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X40-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 0-40mm retract position during product family changeovers without bolting on external stops or replacing the cylinder.
Fine-tune the final retract point at commissioning to perfect part seating or clamping depth using the rear adjustment screw.
Create a flexible travel window for testing fixtures where the required stroke length needs on-the-fly mechanical adjustment.
The adjustable stroke is ideal for product-size changeovers on a line, allowing you to shorten the travel window down to 0mm without physically swapping the cylinder or adding external stops.
When specifying a replacement, match the 40mm stroke, 40mm adjustment range, PT port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. Because the stroke is under 300mm, side-load stress is minimal, though the M12x1.25 rod thread still handles moderate lateral loads effectively.
Quick checklist
The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke by up to 40mm, providing a usable travel window of 0-40mm. It only sets the travel end and does not hold the load without live air pressure.
At the maximum operating pressure of 1.0 MPa, it can deliver up to 128 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.