
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X400-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 400mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X400-20 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear screw, you achieve a usable travel window of 380 to 400 mm, allowing precise end-position tuning without swapping hardware.
This adjustable stopper is ideal for product changeovers, letting you trim the stroke by up to 20 mm on the fly. The extruded aluminum barrel features sensor grooves on both sides, though this non-magnet variant requires a -S suffix to host CMSE reed or DMSE electronic sensors. It supports a standard mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 380-400 mm travel window during format changes to accommodate slightly different product lengths without adding external stopper blocks.
Fine-tune the retraction point on a 400 mm stroke transfer conveyor to prevent over-travel and adjust for mechanical wear over time.
Conversely, lighter duties can use the 32 mm bore at 402 N. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for true pneumatic locking, consider the SAIL or BSAI series.
Because the 400 mm stroke is relatively long, the 16 mm carbon steel rod and M12x1.25 rod thread will still experience leverage under side loads. Always use an external guide rail to prevent binding. To match this ISO 15552 footprint exactly, specify a 40 mm bore, 400 mm stroke, 20 mm adjustment, PT G1/4 port, and the required mounting bracket.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the effective travel from the nominal 400 mm down to 380 mm. This creates a 380-400 mm usable window for fine-tuning the end position during commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.