verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-30

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X400-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 400mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke400 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$98.60 $106.10Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-30

The AirTAC SAIJ40X400-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 370 to 400 mm, allowing you to dial back the 400 mm nominal stroke by up to 30 mm during commissioning.

This adjustable-stop design eliminates the need to swap cylinders or bolt on external spacers when product sizes change on a line. The rear adjuster acts purely as a travel stop that sets the end position alongside the variable air cushions; it is not a lock, so the cylinder cannot hold a load without live air. For position holding without pressure, consider a SAIL or BSAI series. The extruded aluminum barrel includes sensor grooves on both sides, ready for AirTAC CMSE reed and DMSE electronic switches if a magnet is specified later.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-30 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X400-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke400 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-30

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×400Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-30 Is Used

settings_input_component

Machine Changeover

Fine-tune the 370-400 mm retract position during product size transitions without swapping the cylinder or adding external shims.

precision_manufacturing

End-Stop Tuning

Dial in the exact end-of-stroke contact point during commissioning to absorb mechanical tolerances in a new fixture build.

conveyor_belt

Variable Diverter Stroke

Adjust the travel distance of a diverter arm on a conveyor line to handle varying package dimensions on the fly.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-30 the Right Cylinder?

An adjustable stroke is ideal for machine changeover and fine-tuning the retract end position without external stops, unlike a fixed-stroke SAI cylinder. Because the 400 mm stroke is relatively long, the 16 mm rod still needs an external guide to prevent excessive side loading. This unit uses PT tapered port threads, carbon steel rod material, and the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) with no magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-30 FAQ

The rear adjuster lets you shorten the 400 mm nominal stroke by up to 30 mm, giving an effective travel window of 370 to 400 mm. It acts as a mechanical stop to set the end position and does not lock the load without air pressure.

It operates at speeds of 30 to 800 mm/s.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X400-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.