
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X400-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 400mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X400-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 360 to 400 mm, letting you dial back the nominal 400 mm stroke by up to 40 mm during commissioning.
This extruded aluminum profile unit omits the FB, CA, CB, and CR mounts, utilizing a focused mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The carbon steel rod and M12x1.25 thread offer solid side-load resistance, though a 400 mm stroke still requires an external guide. The PT tapered port threads and dual-side sensor grooves accommodate future CMSE or DMSE sensor additions.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 360-400 mm travel window during initial machine commissioning to perfect end-stop positions without hardware changes.
Quickly adapt the cylinder's effective stroke on packaging lines when switching between different product sizes.
Use the rear adjuster screw to set precise, repeatable retract positions for multi-format manufacturing processes.
Choose this 40 mm bore when you need precise end-position tuning without swapping cylinders or adding external stops. If you need more power, moving up to a 50 mm bore provides 982 N.
The rear adjuster acts strictly as a travel stop, not a lock, meaning it cannot hold the load without live air pressure. For load-holding requirements without continuous air, consider an AirTAC SAIL or BSAI cylinder. As a dimensionally interchangeable ISO 15552 cylinder, you can directly match the 40 mm bore, 400 mm stroke, 40 mm adjustment, PT port, and your chosen mounting interface. Because the stroke is 400 mm, always support the load with an external guide to prevent rod deflection.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster allows you to shorten the effective travel from the 400 mm nominal stroke by up to 40 mm. This creates a usable 360-400 mm window, acting as a mechanical stop to fine-tune the end position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.