verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-75

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X400-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 400mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke400 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$98.60 $106.10Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-75

The AirTAC SAIJ40X400-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster that permits up to 75mm of travel reduction. This creates a usable stroke window of 325-400mm, allowing you to dial in the exact retract position during commissioning without swapping out the barrel or adding external stops.

The extruded aluminum barrel includes sensor grooves on both sides for mounting AirTAC CMSE reed or DMSE electronic solid-state switches (requires an -S magnet). The SAIJ mounting set is intentionally reduced to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. The rear adjuster acts purely as a mechanical stop to set the travel end and does not hold the load without live air pressure; for fail-safe load holding, consider the SAIL or BSAI series.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-75 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X400-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke400 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-75

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×400Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-75 Is Used

settings_input_component

Adjustable Machine Stops

Fine-tune the 325-400mm travel window during commissioning to set precise retract positions without physically replacing the cylinder or adding external stopper blocks.

conveyor_belt

Product Changeover

Quickly adapt the stroke end-position on a packaging line when handling different carton sizes, using the 75mm adjustment range to modify the effective travel distance.

precision_manufacturing

End-Position Tuning

Dial in the exact end-of-stroke location during machine setup to compensate for mechanical tolerance stack-up, ensuring precise positioning without custom shimming.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-75 the Right Cylinder?

The 75mm adjustment range is ideal for product changeovers on a line, letting you shift the retract distance dynamically rather than machining new hard stops.

Because the 400mm stroke is substantial, the unsupported rod end is susceptible to bending under lateral loads; always use an external guide rail to prevent side-load damage. This cylinder uses a PT tapered G1/4 port and is dimensionally interchangeable per ISO 15552 mounting interfaces. Remember that the rear adjuster is a travel stop, not a lock—maintain live air to hold position.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-75 FAQ

The nominal stroke is 400mm, but the rear adjuster allows you to shorten the effective travel by up to 75mm. This provides an adjustable usable stroke window of 325-400mm, which can be fine-tuned during commissioning.

At the maximum operating pressure of 1.0 MPa, the push force increases to 1130N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X400-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X400-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.