
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X425-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 425mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X425-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 425 mm stroke that can be fine-tuned backward by up to 10 mm, yielding a usable travel window of 415-425 mm.
This extruded aluminum profile cylinder omits the FB, CA, CB, and CR mounts, utilizing a focused set of ISO 15552 attachments: Basic, FA, LB, TC, FTC, TCM1, and TCM2. The carbon steel piston rod features an M12x1.25 thread, providing a robust interface for your mechanical couplings without needing external stops.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 415-425 mm travel distance during machine commissioning to accommodate sensor variance or mechanical tolerances without adding external stopper blocks.
Quickly adjust the retract end-position by up to 10 mm when switching between slightly different product sizes on a packaging line.
Fine-tune the stroke of a diverter arm to ensure precise alignment with varying pallet widths while maintaining a standard ISO 15552 footprint.
Select this 40 mm bore when an application requires precise end-position tuning during commissioning or product changeover, avoiding the need to swap out a fixed-stroke SAI cylinder. If your setup demands higher thrust, stepping up to a 50 mm bore yields 982 N at 0.5 MPa; conversely, a 32 mm bore drops to 402 N. Because the 425 mm stroke is relatively long, ensure an external guide supports the load to prevent excessive side-loading on the M12x1.25 rod.
To match this ISO 15552 interchangeable cylinder, confirm the 425 mm stroke, 10 mm adjustment range, PT tapered port threads, and the absence of a magnet (-S not specified). Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-air load holding, consider an external rod lock or the SAIL series.
Quick checklist
If operated at 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the effective travel from the nominal 425 mm down to 415 mm. This creates a 415-425 mm usable window for fine-tuning the retract end position at commissioning without changing the cylinder itself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.