
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X425-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 425mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X425-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The built-in stopper allows you to dial back the 425mm nominal stroke by up to 100mm, creating a precise 325-425mm usable travel window for exact end-position tuning.
This adjustable design eliminates the need to swap cylinders or bolt on external stops during product changeovers. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. It retains the standard ISO 15552 mounting footprint while offering a reduced set of mounting options: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the 325-425mm stroke window on packaging lines handling varying carton lengths without replacing hardware.
Fine-tune the exact retract end-position during commissioning to dial in tooling clearance perfectly on the first run.
Adapt automated assembly stations to different part widths by simply turning the rear adjuster screw to shorten the stroke.
An adjustable stroke is ideal for machines processing multiple product sizes, allowing operators to fine-tune the retract position at commissioning without changing the cylinder. Because the 425mm stroke is relatively long, an external guide is recommended to prevent excessive side-loading on the 16mm rod.
To match this ISO 15552 cylinder, confirm a 40mm bore, 425mm stroke, 100mm adjustment range, PT tapered port thread, and carbon steel rod material. Note that the rear adjuster acts strictly as a travel stop and does not hold the load without live air; for dead-air load holding, consider an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster acts as a mechanical stop that lets you trim the effective stroke back by up to 100mm, providing a usable travel window of 325-425mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.