
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X425-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 425mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X425-20 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 425 mm stroke that can be fine-tuned backward by up to 20 mm, creating a precise 405-425 mm usable travel window for commissioning without external stops.
This extruded aluminum profile cylinder features variable air cushions at both ends and operates at speeds between 30 and 800 mm/s. It uses a PT tapered G1/4 port and supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. The rear adjuster acts purely as a travel stop for end-position deceleration, not a load-holding lock.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 405-425 mm retract position during product size changes without swapping the cylinder or adding mechanical shims.
Fine-tune the actuation endpoint on a sorting line to accommodate different package lengths on the fly.
Trim the final 20 mm of stroke during machine setup to perfectly seat a part against a hard stop without overtravel.
An adjustable-stroke SAIJ is chosen over a fixed SAI when you need to dial in the exact retract position on the fly. Because the stroke is 425 mm, the 16 mm rod needs external guidance to prevent excessive side-loading on the seals.
For a true ISO 15552 dimensionally interchangeable replacement, match the 40 mm bore, 425 mm stroke, 20 mm adjustment, G1/4 PT port, and your required mounting bracket. Since no magnet is specified, this base configuration does not support position sensing; add an -S suffix if you need CMSE reed or DMSE electronic solid-state switches in the dual sensor grooves. Remember that the rear adjuster only sets the travel end—it will not hold the load without live air pressure, so consider a SAIL or BSAI cylinder if true locking is required.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 128 kgf.
The rear adjusting screw acts as a mechanical stop that trims the effective stroke back by up to 20 mm, giving a usable travel window of 405 to 425 mm. It only sets the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.