verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-30

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X425-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 425mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke425 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$103.51 $111.01Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-30

The AirTAC SAIJ40X425-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down from 425mm to a 395mm minimum.

This model uses a PT tapered G1/4 port and a 16mm carbon steel rod with an M12x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily mount CMSE reed or DMSE electronic switches later if position feedback becomes necessary.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-30 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X425-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke425 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-30

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×425Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-30 Is Used

tune

Machine Setup Tuning

Dial in the exact 395-425mm travel end-point during initial commissioning to perfectly align product pushers without swapping cylinders.

settings_input_component

Product Changeover

Quickly adjust the stroke stop on the fly when a packaging line switches to a different carton size, saving setup time.

precision_manufacturing

Variable End-Stop Positioning

Fine-tune the retract distance for delicate assembly presses where hitting a precise depth is critical for part quality.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-30 the Right Cylinder?

Choose this adjustable-stroke unit over a fixed SAI cylinder when you need to dial in the exact end position during machine commissioning or product changeover without adding external stops. If your application requires less force, stepping down to a 32mm bore yields 563N at 0.7MPa. Because the 425mm stroke is relatively long, an external guide is recommended to prevent excessive side-loading on the 16mm rod.

The rear screw acts strictly as a travel stop and works with the variable air cushions to decelerate the load; it does not hold the load without live air pressure. For direct ISO 15552 replacement, match the 40mm bore, 425mm stroke, 30mm adjustment, PT port, and mounting options from the reduced SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-30 FAQ

The rear adjuster screw lets you shorten the nominal 425mm stroke by up to 30mm, giving an effective adjustable travel window between 395mm and 425mm without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X425-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.