
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X425-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 425mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X425-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 425 mm nominal stroke that can be dialed back by up to 40 mm, giving you a precise 385-425 mm usable travel window for product changeovers.
This extruded aluminum profile cylinder uses a standard G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread. The rear adjuster acts purely as a mechanical stop to set the retract position and relies on the integrated air cushions for end-of-stroke deceleration; it is not a locking device and will not hold a load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 385-425 mm window during commissioning to perfect product placement without machining new hard stops.
Quickly adapt the retract stroke on automated lines when switching to a different package size or part height by turning the rear adjustment screw.
Use the 16 mm rod and G1/4 port to safely position medium-weight components, relying on the built-in air cushions for smooth deceleration.
Choose this adjustable-stroke model when your machine setup requires fine-tuning the end position at commissioning without swapping out the entire cylinder or adding external stopper blocks. For applications needing fail-safe load holding without continuous air pressure, consider the SAIL or BSAI series instead, as the SAIJ adjuster only trims travel. To match this ISO 15552 replacement exactly, verify the 40 mm bore, 425 mm stroke, 40 mm adjustment range, PT tapered port thread, and standard carbon steel rod without a magnet.
Because the 425 mm stroke creates a long unsupported rod extension, you should use an external guide to prevent side-loading damage to the rod seals. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR brackets found on some fixed-stroke variants.
Quick checklist
The rear adjuster allows you to shorten the effective stroke by up to 40 mm, providing a usable travel range of 385 to 425 mm. It functions as a mechanical stop for the retract end and works with the air cushions for deceleration, but it does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.