
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X425-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 425mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X425-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 385 to 425 mm. The integrated magnet enables position feedback via CMSE reed and DMSE electronic sensors.
The rear adjustment screw allows you to fine-tune the retract end-position at commissioning without adding external stops. Because the stroke exceeds 300 mm, the 16 mm carbon steel rod and M12x1.25 thread should be supported by an external guide to manage side loads. The mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 385-425 mm travel window during product size changes without physically swapping the cylinder.
Fine-tune the exact retract position during commissioning using the rear screw rather than adding external stops.
Adjust the stroke on packaging lines to accommodate different carton lengths on the fly.
The 40 mm adjustment range is selected over a fixed SAI cylinder when a product changeover requires variable end-stops. Remember that the rear adjuster is a travel stop, not a lock; this cylinder will not hold a load without live air. For load-holding, consider an AirTAC SAIL or BSAI cylinder.
To replace an ISO 15552 cylinder, match the 40 mm bore, 425 mm stroke, PT port, and the -S magnet requirement. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the nominal 425 mm stroke by up to 40 mm, giving an effective travel range of 385 to 425 mm. It acts as a stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.