
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X425-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 425mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X425-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel window from 375 to 425 mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This model features a 16mm carbon steel piston rod with an M12x1.25 thread, providing a sturdy interface for your tooling. The rear adjuster acts purely as a mechanical stop to set the retract end-position during commissioning or product changeover; it is not a lock and will not hold the load without live air pressure. For applications requiring true position holding, consider the SAIL or BSAI series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 375-425 mm window during product size changeovers without changing cylinder hardware.
Adjust the stroke length on the fly to alter the resting position of a diverter arm on a packaging conveyor line.
Fine-tune the final end-position of a press or clamping fixture during initial commissioning to achieve perfect alignment.
If your process demands higher thrust, stepping up to the 50mm bore yields 1374N, while dropping to the 32mm bore provides 563N. The adjustable stroke is highly advantageous for machine setups requiring precise end-position tuning without swapping out the entire cylinder or adding external stopper blocks.
Because this cylinder features a 425mm stroke, the 16mm rod is subject to potential side-loading forces; an external guide rail is recommended to prevent premature seal wear. This configuration uses a PT tapered port thread, standard carbon steel rod material, and no magnet. It supports the SAIJ mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable per ISO 15552.
Quick checklist
The rear adjuster screw lets you shorten the 425mm nominal stroke by up to 50mm, providing a usable travel window of 375-425mm. The adjuster functions as a mechanical stop and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.