verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X425-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 425mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke425 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$103.51 $111.01Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75

The AirTAC SAIJ40X425-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated adjustment mechanism provides a usable travel window of 350-425mm, allowing you to trim the effective stroke by up to 75mm without swapping hardware.

This 425mm stroke utilizes a 16mm carbon steel rod with an M12x1.25 thread, providing a robust interface for standard loads. The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement. If you require position feedback, adding the -S magnet option allows the use of AirTAC CMSE reed or DMSE electronic sensors.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X425-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke425 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×425Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75 Is Used

tune

Machine Changeover

Dial in the 350-425mm travel window during product size changes to set new retract endpoints without physically replacing the cylinder.

conveyor_belt

Variable Diverter Stops

Adjust the stroke on the fly to handle different package sizes on a conveyor line without adding external mechanical stops.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75 the Right Cylinder?

The rear screw acts purely as a travel stop to set the retract position; it does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series instead.

When replacing an ISO 15552 cylinder, match the 40mm bore, 425mm nominal stroke, 75mm adjustment range, PT G1/4 port, and mounting choice. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR. Because the 425mm stroke is relatively long, ensure adequate external guiding to prevent excessive side-loading on the rod.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75 FAQ

At 0.7 MPa, the push force increases to 879N.

The rear adjuster screw lets you shorten the nominal 425mm stroke by up to 75mm, creating a usable travel window of 350-425mm. It functions as a mechanical stop and does not lock the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X425-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.