verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X425-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 425mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke425 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$106.30 $113.80Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75S

The AirTAC SAIJ40X425-75-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster. It provides a 425 mm nominal stroke that can be dialed back by up to 75 mm, yielding a usable travel window of 350-425 mm.

This model includes a standard -S magnet compatible with AirTAC CMSE reed and DMSE electronic sensors. The rear adjusting screw allows precise end-position tuning during commissioning without swapping the cylinder or adding external stops. The adjuster acts purely as a mechanical stop and does not hold the load without live air pressure.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X425-75S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke425 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×425Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75S Is Used

precision_manufacturing

Product Changeovers

Dial the stroke back by up to 75 mm to accommodate varying package sizes on the fly without physically replacing the actuator.

conveyor_belt

Diverter Positioning

Fine-tune the end stop position during initial commissioning to perfectly align a diverter arm with a moving conveyor belt.

factory

Machine Setup

Use the 350-425 mm travel window to set precise mechanical stops for pressing or indexing tasks before finalizing the pneumatic pressure.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75S the Right Cylinder?

The 75 mm adjustment range is ideal for product-size changeovers on a packaging line, replacing fixed-stroke SAI cylinders when variable end-stops are needed. For load-holding without live pressure, select a SAIL or BSAI cylinder instead, as the SAIJ adjuster is not a lock.

Because the 425 mm stroke exceeds 300 mm, an external guide is recommended to manage side loads, even with the 16 mm carbon steel rod and M12x1.25 thread. This PT-threaded model uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75S FAQ

The rear adjuster screw lets you shorten the 425 mm nominal stroke by up to 75 mm, creating a usable travel window of 350-425 mm. It functions as a mechanical stop to set the end position and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X425-75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X425-75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.