
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X45-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 45mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X45-10 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to dial in the exact retract end-position at commissioning without adding external stops.
The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, though this specific SKU is configured without a magnet. It features a standard carbon steel piston rod and a PT tapered port thread. The rear adjuster acts strictly as a travel stop to set deceleration, not as a lock, so live air is required to hold the load.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 35-45mm travel window during product line changeovers to perfectly position parts without physically swapping the cylinder.
Dial in the exact retract distance for delicate machining or clamping tasks where a fixed 45mm stroke would apply too much overtravel.
Precisely adjust the seating depth of electronic connectors or pins by trimming the stroke in millimeter increments at the rear stopper.
An adjustable stroke is selected over a fixed SAI cylinder when you need on-the-fly end-stop changes during machine setup or product changeovers. To replace an ISO 15552 cylinder, match the 40mm bore, 45mm stroke, 10mm adjustment, PT G1/4 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw allows you to shorten the 45mm nominal stroke by up to 10mm, providing a usable travel window of 35-45mm. It functions as a mechanical stop for end-position tuning and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.