verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-10S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X45-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 45mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke45 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$68.62 $76.12Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-10S

The AirTAC SAIJ40X45-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the end position at commissioning without adding external stops. A magnetic piston is included for position sensing.

This 40mm bore model features a 16mm carbon steel rod and M12x1.25 rod thread, which handles side loads better than smaller variants, though external guides are still recommended for unsupported loads. The extruded aluminum barrel includes sensor grooves on both sides, and the standard PT G1/4 porting ensures straightforward integration.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-10S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X45-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke45 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-10S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×45Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-10S Is Used

tune

Precision End-Stop Tuning

Dial in the exact 35-45mm travel window during machine commissioning to perfect part ejection or gripping distances.

settings_input_component

Product Size Changeover

Quickly adapt the cylinder's stroke limit on packaging lines when switching between different product sizes.

factory

Automated Clamping Stations

Provide adjustable clamping force and travel limits for delicate workpieces without swapping out the entire cylinder.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-10S the Right Cylinder?

Choose this adjustable-stroke cylinder when your machine setup requires precise variable end-stops or frequent product-size changeovers, rather than a fixed-stroke SAI cylinder. If your application needs slightly less force, the 32mm bore provides 402N at 0.5MPa; for higher thrust, stepping up to the 50mm bore yields 982N. As a double-acting cylinder, the rear adjuster acts only as a travel stop and does not hold the load without live air—use SAIL or BSAI cylinders for fail-safe load holding. For ISO 15552 replacement, match the 40mm bore, 45mm stroke, 10mm adjust, G1/4 PT port, and -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-10S FAQ

The rear adjuster screw allows you to shorten the nominal 45mm stroke by up to 10mm, creating a usable travel window of 35-45mm. The adjuster acts as a mechanical stop to fine-tune the retract end position and does not function as a load-holding lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X45-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.