
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X45-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 45mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X45-20-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. Equipped with a magnet, it supports AirTAC CMSE reed and DMSE electronic sensors via dual-side barrel grooves.
This model provides a usable travel window of 25-45 mm, allowing you to dial back the stroke by up to 20 mm during commissioning. The extruded aluminum barrel omits tie-rods for a compact footprint. It uses PT tapered G1/4 ports and includes adjustable air cushions at both ends to manage end-of-stroke deceleration.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-of-stroke position within the 25-45mm window during initial commissioning without adding external physical stops.
Quickly adjust the travel distance on a packaging line when switching to a different product size, saving changeover time.
Provide precise variable clamping force up to 628N at 0.5 MPa on small workpieces, fine-tuning the travel to avoid crushing parts.
The adjustable stroke is ideal for variable end-stops or product changeovers without swapping cylinders. Note that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For load-holding without pressure, consider the SAIL or BSAI series.
For ISO 15552 replacement matching, use bore 40, stroke 45, 20mm adjustment, PT G1/4 ports, and the -S magnet. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Because the 45mm stroke is short, external side-load guides are less critical here than on longer strokes.
Quick checklist
The rear adjuster screw lets you shorten the nominal 45mm stroke by up to 20mm, creating a usable travel window of 25-45mm. The adjuster acts as a mechanical stop and works with the air cushions to manage deceleration, but it does not lock the load without continuous air pressure.
The -S suffix indicates a built-in magnet compatible with AirTAC CMSE reed switches and DMSE electronic sensors mounted in the dual-side sensor grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.