
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X45-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 45mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X45-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 15 to 45 mm, allowing you to dial back the nominal 45 mm stroke by up to 30 mm.
The standard carbon steel piston rod uses an M12x1.25 thread, offering a robust interface for mounting attachments. The rear adjustment screw functions strictly as a mechanical stop to fine-tune the retract position during commissioning. It does not lock or hold the load without live air pressure; for true load-holding without continuous air, consider the SAIL or BSAI variants.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the retract end-stop by up to 30 mm when switching between product sizes on a packaging line, avoiding cylinder removal or external stop hardware.
Fine-tune the exact retraction point during machine commissioning to perfect a pressing or clamping operation within the 15-45 mm travel window.
Fit a short-stroke ISO 15552 actuator into a tight machine section while retaining the ability to tweak travel distance as the final design parameters settle.
Choose this 40 mm bore when you need precise retract positioning on the fly, such as accommodating a slight product size change without bolting on external stops or swapping a fixed-stroke SAI cylinder. If your application requires less force, stepping down to a 32 mm bore yields 402 N at 0.5 MPa. If more thrust is needed, a 50 mm bore provides 982 N at 0.5 MPa.
This configuration includes a PT tapered port, standard carbon steel rod, and no magnet. It uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR options. Because the 45 mm stroke is short, side-load risks are minimal, but always ensure rigid rod-end coupling to prevent binding.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it can deliver up to 128 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from 45 mm down to as little as 15 mm. This provides a 15-45 mm usable travel window for precise end-position tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.