
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X45-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 45mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X45-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because it carries the -S magnet option, it directly supports AirTAC CMSE reed and DMSE electronic solid-state sensors for precise end-position detection.
The defining characteristic of this SKU is its highly compact 45mm nominal stroke paired with a 30mm adjustment range, yielding a usable travel window of 15-45mm. This wide setup latitude allows operators to fine-tune the retract end-position at commissioning or during product-size changeovers without physically swapping the cylinder or adding external mechanical stops.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 15-45mm travel distance required when switching a packaging line between different carton sizes, eliminating the need for physical spacer replacements.
Set precise retract positions for multi-stage assembly presses where the rear target point varies slightly between production runs, using the 30mm adjustment screw.
Leverage the -S magnet and dual-side sensor grooves to mount DMSE electronic sensors for high-precision confirmation of the adjusted end-stroke in automated workflows.
Selecting this 40mm bore over a neighboring 32mm bore increases your 0.5 MPa push thrust from 402N to 628N, providing extra force authority for mid-duty clamping or positioning tasks. The adjustable stroke is specifically chosen when a machine requires variable end-stops for different product sizes, offering a plug-and-play tuning range instead of fabricating custom fixed-length SAI cylinders.
For any ISO 15552 replacement, match the 40mm bore, 45mm stroke, 30mm adjustment, PT port thread, and the -S magnet requirement. Note that the rear adjuster acts strictly as a travel stop to decelerate the piston, not as a locking mechanism. If your application requires true load-holding without live air pressure, you must integrate an external pilot-operated check valve or select a different cylinder series like SAIL or BSAI. The SAIJ mounting set omits FB, CA, CB, and CR brackets, utilizing a reduced subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 879N.
The rear adjuster screw allows you to shorten the effective stroke by up to 30mm. With the 45mm nominal stroke, this creates a usable travel window of 15-45mm, enabling fine-tuning of the end-position at commissioning without changing the cylinder's physical mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.