
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X45-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 45mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X45-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 45 mm travel by up to 40 mm. This yields a highly versatile 5 to 45 mm usable stroke window, perfect for dialing in exact end positions without adding external stops.
The extruded aluminum barrel features sensor grooves on both sides for flexible switch mounting. The standard carbon steel piston rod has an M12x1.25 thread, while the PT tapered port matches the bore size. The rear adjuster acts purely as a mechanical stop to set the travel end and is not a lock, meaning live air is required to hold the load.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact clamping reach on a new R&D fixture by adjusting the rear stopper from 5 to 45 mm until the optimal travel is found.
Quickly adapt a short-stroke assembly station to new part heights by turning the rear adjuster, avoiding the need to physically swap out the entire cylinder.
Execute precise 5 to 45 mm pressing or seating operations where overshoot would damage the workpiece, relying on the mechanical stop for repeatable end-positioning.
The 40 mm adjustment range on a short 45 mm stroke is exceptionally wide, making this SKU ideal for prototyping cells or short-stroke clamping stations where the exact reach must be determined empirically during commissioning rather than pre-calculated.
Because the stroke is under 300 mm, side-load risks are minimal, though a guide is still recommended for lateral loads. For applications requiring the cylinder to maintain its position without continuous air pressure, this adjustable stop will not suffice—consider the SAIL (air-released lock) or BSAI (clamp-lock) series instead. This model uses the standard SAIJ mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR).
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
The rear adjuster screw allows you to mechanically shorten the stroke by up to 40 mm from the nominal 45 mm, creating a usable travel window of 5 to 45 mm. The adjuster functions only as a travel stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.