
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X450-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 450mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X450-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 440-450mm usable travel window, allowing you to dial back the nominal 450mm stroke by up to 10mm during machine setup.
This model uses a 16mm carbon steel rod with an M12x1.25 thread, providing a robust interface that handles moderate side loads well. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches if a magnet is added later. It supports the standard SAIJ mounting set, including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X450-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 440-450mm travel window during product size changeovers without physically swapping the cylinder or repositioning hard stops.
Trim up to 10mm of stroke at commissioning to perfectly seat a part or avoid mechanical interference at the end of the 450mm extension.
Accommodate varying package lengths on a conveyor line by adjusting the retract stopper within the 10mm range before cycling.
If you need higher force, stepping up to the 50mm bore yields 982N; stepping down to the 32mm bore provides 402N. The adjustable rear stopper is a travel limit, not a lock, so it will not hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series.
When replacing an ISO 15552 cylinder, match the 40mm bore, 450mm stroke, PT tapered port threads, and the desired mounting style. Because the stroke is 450mm, long unsupported travel increases rod deflection, so an external guide is recommended to prevent premature seal wear.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
A rear adjuster screw acts as a mechanical stop, letting you shorten the 450mm stroke by up to 10mm, creating a 440-450mm usable travel window. It only sets the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.