
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X450-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 450mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and PT tapered port threads. By turning the external stopper screw, you can fine-tune the effective travel within a 430-450 mm window, providing exact end-position calibration without swapping out the entire actuator.
Because the nominal 450 mm stroke is relatively long, the 16 mm rod and M12x1.25 thread should be paired with an external guide to handle potential side loads. This adjustable stopper acts purely as a travel end limit and works alongside the standard 30 mm air cushions to decelerate the load, but it does not hold the load without live air pressure. For position holding, consider a SAIL or BSAI variant.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X450-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 430-450 mm travel window during product line changeovers to accommodate different package sizes without physically replacing the actuator.
Fine-tune the retract end-position during commissioning to achieve precise mechanical alignment, utilizing the 20 mm rear adjustment screw.
Handle long-stroke diverting tasks on a conveyor where the 450 mm travel is occasionally trimmed back by up to 20 mm to avoid collision with adjacent fixtures.
The adjustable-stroke design is ideal for machine setups requiring variable end-stops or product changeovers, offering more flexibility than a fixed-stroke SAI cylinder. To replace an ISO 15552 cylinder, match the 40 mm bore, 450 mm stroke, 20 mm adjustment, PT port thread, and standard carbon steel rod.
Since the stroke is 450 mm, supporting the load with an external guide is critical to prevent excessive wear on the rod seals. Note that the rear adjuster only sets the retract end position; it is not a locking device and cannot hold a load without continuous air pressure.
Quick checklist
At 0.5 MPa, the push force is 628N and the pull force is 528N. If you increase the operating pressure to 0.7 MPa, the push force rises to 879N.
The rear adjuster screw allows you to shorten the 450 mm nominal stroke by up to 20 mm, creating a usable travel window of 430-450 mm. This stopper only limits the travel end and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.