verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X450-30

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X450-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 450mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke450 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$103.51 $111.01Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X450-30

The AirTAC SAIJ40X450-30 is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster. It provides a 420-450mm usable travel window, allowing you to dial back the 450mm nominal stroke by up to 30mm during machine setup.

The 16mm carbon steel rod and M12x1.25 thread offer solid load support, but at 450mm of travel, external guides are recommended to prevent side-loading. The rear adjuster acts as a hard stop for end-position tuning, not a lock, and the cylinder uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X450-30 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X450-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke450 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X450-30

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×450Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X450-30 Is Used

tune

Machine Changeover

Fine-tune the 420-450mm travel window during product size changes without replacing the cylinder or adding external stoppers.

conveyor_belt

Variable End-Stop

Set exact retract positions on packaging lines where the rear stopper trims the 450mm stroke up to 30mm for varied package lengths.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X450-30 the Right Cylinder?

Choose this 40mm bore if you need precise end-position tuning without swapping cylinders, as the 30mm adjustment window is ideal for product changeovers. If your application requires less force, stepping down to a 32mm bore yields 402N at 0.5 MPa, while stepping up to a 50mm bore provides 982N. For holding loads without live air pressure, the rear stopper is insufficient; you should use an external rod lock or pilot-operated check valve. To match this ISO 15552 replacement exactly, verify the 450mm stroke, 30mm adjuster, PT port, and mounting style.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X450-30 FAQ

The rear adjuster lets you shorten the 450mm nominal stroke by up to 30mm, creating a 420-450mm usable travel window. The adjuster acts as a travel stop for end-position tuning, not a lock, and does not hold the load without live air pressure.

At 0.7 MPa, the push force increases to 879N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X450-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X450-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.