
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X450-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 450mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X450-50-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 450 mm stroke that can be fine-tuned backward by up to 50 mm, yielding a highly flexible 400-450 mm usable travel window. This built-in adjustability allows operators to dial in exact retract end positions during commissioning or product changeovers without swapping out the entire actuator.
Equipped with a magnetic piston (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side sensor grooves of its extruded aluminum barrel. The carbon steel rod features an M12x1.25 thread, and air supply connects via PT tapered G1/4 ports. It utilizes a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, intentionally omitting FB, CA, CB, and CR brackets to streamline its adjustable rear architecture.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X450-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly modify the 400-450 mm retract end-stop when switching a packaging line to accommodate different carton depths without changing hardware.
Fine-tune the exact bottoming position during initial commissioning to perfect a pressing or forming operation within a 50 mm adjustment band.
Adjust the stroke length on a sorting diverter arm to handle varying package widths on the fly while maintaining consistent positioning.
Selecting this 40 mm bore actuator makes sense when an application requires a 400-450 mm travel window that must be precisely trimmed on-site, rather than relying on a fixed-stroke SAI cylinder. Because the stroke is 450 mm, the M12x1.25 rod will experience leverage forces under load, so an external guide rail is recommended to prevent side-loading damage.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders of the same bore and stroke. To match this exact configuration, specify a 40 mm bore, 450 mm stroke, 50 mm adjustment range, PT tapered port threads, and the -S magnet option. Note that the rear adjuster functions strictly as a travel stop and does not hold the load without live air pressure; for positive load-holding, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
The rear adjuster acts as a mechanical stop that shortens the 450 mm nominal stroke by up to 50 mm, providing a usable travel window of 400-450 mm. It is a travel stop only and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.