
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X475-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 475mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X475-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position at commissioning. With a nominal 475 mm stroke and a 100 mm adjustment range, it provides a usable travel window of 375 to 475 mm. This means you can dial back the retract distance without swapping the cylinder or adding external stops.
The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE or DMSE switches. It uses a G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread. Because the 475 mm stroke is relatively long, the unsupported rod is susceptible to side-loading; relying on an external guide ensures smooth travel and prevents premature seal wear. The rear adjuster acts strictly as a travel stop, so it will not hold the load safely without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X475-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 375-475 mm window during machine commissioning without physically swapping hardware.
Quickly adjust the travel stop on a packaging line to accommodate varying package lengths on the fly.
Set precise end-stops for automated assembly stations where fixed-stroke cylinders lack the required flexibility.
An adjustable stroke is ideal for product changeovers on a line where the exact end-stop varies by tens of millimeters, saving you from maintaining a large inventory of fixed-stroke SAI cylinders. If you need to hold the load in place without continuous air pressure, this standard adjuster will not act as a lock; you would need to step up to an SAIL or BSAI series cylinder.
To replace this ISO 15552 cylinder accurately, match the 40 mm bore, 475 mm nominal stroke, 100 mm adjustment range, PT tapered port thread, and the standard carbon steel rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting the FB, CA, CB, and CR brackets. Given the 475 mm stroke, always factor in an external guide to manage side-load and prevent rod deflection.
Quick checklist
The rear adjuster screw allows you to shorten the 475 mm nominal stroke by up to 100 mm, creating a usable travel window of 375 to 475 mm. The adjuster acts as a mechanical stop and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.