
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X475-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 475mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X475-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel within a 455-475 mm window. The PT tapered port threads and standard carbon steel rod keep it aligned with conventional pneumatic setups.
Because the adjuster acts purely as a mechanical stop on the retract end, you can dial in the exact end-position during commissioning without adding external stops or swapping the cylinder. The extruded aluminum barrel includes sensor grooves on both sides, and while this specific SKU lacks the -S magnet option, the grooves remain ready for retrofitting CMSE reed or DMSE electronic sensors if your application evolves.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X475-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 455-475 mm travel window during product size changes to set precise retract positions without swapping hardware.
Acts as an adjustable end-stop for diverting items on a conveyor, allowing fine-tuning of the retract distance to match new package sizes.
Perfect for commissioning long-stroke assemblies where the exact bottoming-out point must be trimmed by up to 20 mm to clear mechanical interference.
The 20 mm adjustment range is ideal for product changeovers on a line, letting you shift the end-stop without replacing the cylinder. If you need to hold the load without live air pressure, note that this adjuster is a stop, not a lock; you should look at the SAIL or BSAI series instead.
As an ISO 15552 profile cylinder, it is dimensionally interchangeable with standard ISO mounts using the SAIJ subset of accessories: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Given the 475 mm stroke, the 16 mm rod and M12x1.25 thread provide rigidity, but an external guide is highly recommended to prevent side-load damage over this long unsupported travel.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 475 mm nominal stroke by up to 20 mm, creating a usable travel window of 455 to 475 mm. It only sets the travel end and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.