
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X475-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 475mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X475-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 475mm stroke that can be fine-tuned down by up to 40mm, creating a precise 435-475mm usable travel window.
This extruded aluminum profile cylinder features a 16mm carbon steel rod and M12x1.25 rod thread, offering solid resistance to side loads. It supports standard PT G1/4 ports and uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X475-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 435-475mm end position during product size changes without swapping hardware or adding external stopper blocks.
Adjust the retract stroke on the fly to handle different package lengths on a sorting line.
Fine-tune the final retract position during commissioning to perfect the alignment of tooling and fixtures.
The 40mm adjustment range is ideal for applications requiring variable end-stops during product changeovers, eliminating the need to physically swap out a fixed-stroke SAI cylinder.
Because the 475mm stroke is relatively long, an external guide is recommended to prevent rod binding under heavy lateral loads. Remember that the rear adjuster acts only as a travel stop, not a lock; the SAIJ40X475-40 will not hold its position without live air. For load-holding requirements, consider an AirTAC SAIL or BSAI cylinder. To match this ISO 15552 interchangeable unit, specify: 40mm bore, 475mm stroke, 40mm adjust, PT G1/4 port, and no magnet.
Quick checklist
At 0.9MPa, the push force increases to 1130N.
The rear adjuster screw allows you to shorten the effective stroke by up to 40mm, providing a usable travel window between 435mm and 475mm. It acts as a mechanical stop and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.