
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X475-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 475mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X475-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 400 to 475 mm, allowing you to dial back the nominal 475 mm stroke by up to 75 mm during commissioning.
This model uses a 16 mm carbon steel rod with an M12x1.25 thread, paired with 30 mm air cushions at both ends to manage deceleration. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X475-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly modify the retract end-position by up to 75 mm during product size changeovers without replacing the cylinder or bolting on external stops.
Fine-tune the 400 to 475 mm travel window during commissioning to perfect the timing and positioning of tooling on an assembly line.
Choose this 40 mm bore when an application requires precise end-position tuning without swapping cylinders or adding external stops. For lower force needs, the 32 mm bore provides 402 N.
Because the nominal stroke is 475 mm, an external guide is recommended to prevent excessive side-loading on the 16 mm rod. The rear adjuster acts strictly as a mechanical stop and does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series. To match this ISO 15552 replacement, verify the 475 mm stroke, 75 mm adjustment, PT tapered port thread, and the specific mounting interface.
Quick checklist
It has a nominal stroke of 475 mm with a 75 mm adjustment range, meaning the effective travel can be fine-tuned anywhere between 400 and 475 mm.
No, the rear adjuster is a travel stop, not a lock. The cylinder requires live air pressure to maintain position; for fail-safe load holding, use the SAIL or BSAI series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.