verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X50-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 50mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke50 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$68.62 $76.12Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40S

The built-in stopper lets you dial back the nominal 50mm stroke by up to 40mm, creating a precise 10 to 50mm usable travel window for product changeovers without swapping the cylinder. A PT tapered port and carbon steel rod come standard.

This SAIJ variant includes a magnet for CMSE reed and DMSE solid-state sensors, fitting neatly into the extruded aluminum barrel grooves. The rear adjuster acts strictly as a travel stop to set end-position deceleration, not as a load lock; for holding loads without live air, consider an external pilot-operated check valve or the related SAIL lock series.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X50-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke50 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×50Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40S Is Used

settings_input_component

Machine Changeover

Dial in the exact end-stop from 10 to 50mm during product size transitions on a packaging line without changing the cylinder.

precision_manufacturing

End-Position Tuning

Fine-tune the retract stroke at commissioning to perfect the seating of parts, absorbing mechanical variance via the rear stopper.

view_module

Variable Stops

Set distinct travel limits for mixed-model assembly runs, using the 40mm adjustment range to adapt the stroke to each fixture.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40S the Right Cylinder?

If your application demands less force, the 32mm bore offers 563N at 0.7 MPa, whereas the 63mm bore steps up to 2182N for heavier loads. The adjustable stroke is chosen over a fixed SAI cylinder when commissioning requires a variable end-stop rather than bolting on external stops. Mounting options include the reduced SAIJ set: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40S FAQ

The rear adjuster acts as a mechanical stop that shortens the effective travel. For this model, the 50mm nominal stroke can be dialed back by up to 40mm, giving an adjustable usable travel window of 10 to 50mm.

At 0.7 MPa operating pressure, the push force is 879N and the pull force is 528N. The maximum push force reaches 1130N at 0.9 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X50-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.