
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X50-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 50mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X50-50 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 0-50 mm, allowing you to dial back the full 50 mm nominal stroke entirely to zero if needed for precise end-position tuning.
The carbon steel piston rod features an M12x1.25 thread and pairs with a 30 mm variable air cushion at both ends. It uses a PT tapered port and offers integrated sensor grooves on both sides of the extruded aluminum barrel for CMSE reed or DMSE electronic sensors. The mounting set omits FB, CA, CB, and CR brackets, focusing instead on Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 0 to 50 mm during machine setup without adding bulky external stops.
Quickly adapt the cylinder stroke when switching product sizes on a packaging line, saving reconfiguration time.
If you need less force, a 32 mm bore provides 402 N; if you need more, a 50 mm bore offers 982 N. The rear adjuster acts as a mechanical stop to set the travel window, but it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series. To replace an ISO 15552 cylinder, match the 40 mm bore, 50 mm stroke, PT port, and desired mounting bracket.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke by up to 50 mm. Since the nominal stroke is 50 mm, you can adjust the usable travel window anywhere from 0 to 50 mm without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.