
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X500-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 500mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X500-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits a usable travel window of 490 to 500 mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches.
This model features a 16 mm carbon steel rod and M12x1.25 thread. Because the 500 mm stroke is relatively long, the rod diameter provides robust guidance, though an external guide is still recommended for heavy lateral loads. The rear adjuster acts purely as a mechanical stop to trim the stroke and is not a lock; the cylinder cannot hold a load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X500-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 490 to 500 mm travel window during machine commissioning to perfect the stopping point without adding external stops.
Quickly adapt the stroke length by up to 10 mm on automated lines when handling slightly different product sizes.
Use the 500 mm stroke to push items across a wide conveyor belt, adjusting the travel limit to match varying lane widths.
If your process requires less force, stepping down to a 32 mm bore yields 402 N. If more thrust is needed, a 50 mm bore provides 982 N. The adjustable screw allows up to 10 mm of fine-tuning, which is ideal for product changeovers.
For ISO 15552 interchangeability, match the 40 mm bore, 500 mm stroke, 10 mm adjustment, PT tapered port thread, and standard carbon steel rod. This model uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR mounts. Because the stroke is 500 mm, ensure an external guide supports the load to prevent excessive side load on the rod. For load-holding without live pressure, consider the SAIL or BSAI series instead.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 128 kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the nominal 500 mm stroke by up to 10 mm, creating a 490 to 500 mm travel window. It only sets the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.