
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X500-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 500mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X500-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 500 mm stroke that can be dialed back by up to 100 mm, creating a precise 400-500 mm usable travel window for fine-tuning end positions at commissioning. Featuring a 16 mm carbon steel rod and a G1/4 PT port, it delivers 628 N of pull force at 0.5 MPa.
This adjustable stopper lets you modify the retract distance during product changeovers without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, and while this unit omits the magnet, adding an -S option enables compatibility with AirTAC CMSE reed and DMSE electronic sensors.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X500-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 400-500 mm retract distance during machine commissioning to accommodate different material lengths without external stopper blocks.
Quickly adjust the stroke by up to 100 mm on packaging lines when switching between different product sizes, minimizing downtime.
Fine-tune the end position of a diverting arm on a conveyor belt, ensuring precise alignment without replacing the entire actuator.
Choose this 40 mm bore when you need 628 N pull force at 0.5 MPa, stepping up from a 32 mm bore (345 N pull) or down from a 50 mm bore (825 N pull). The 100 mm adjustment range is ideal for variable end stops and machine setup, providing flexibility that a fixed-stroke SAI cylinder cannot match. To match this exact ISO 15552 replacement, specify: 40 mm bore, 500 mm stroke, 100 mm adjust, PT G1/4 port, carbon steel rod, and no magnet.
Because the stroke is 500 mm, the unsupported rod length increases; ensure you use an external guide to prevent excessive side-loading on the rod seals. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air—use a SAIL or BSAI cylinder for pneumatic locking. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster acts as a mechanical stop, allowing you to shorten the effective stroke from its nominal 500 mm down to 400 mm. It only sets the travel end and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.