
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X500-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 500mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X500-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 480 to 500 mm, allowing you to dial back the nominal 500 mm stroke by up to 20 mm during commissioning.
This adjustable design lets you fine-tune the retract end position without swapping out the entire barrel or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets found in some fixed-stroke variants.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X500-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 480-500 mm window during product size transitions without changing the cylinder mount.
Fine-tune the stroke end-point on packaging lines to accommodate different carton sizes on the fly.
The 20 mm adjustment range is perfect for product changeovers, letting you shift the end-stop by up to 20 mm without mechanical rebuilds. Since the 500 mm stroke is substantial, an external guide is recommended to handle side-load stresses on the 16 mm rod and M12x1.25 thread.
Remember that the rear adjuster acts only as a travel stop, not a lock; it will not hold the load without live air. For drop-pressure holding, consider the SAIL or BSAI series. This model uses a PT tapered port thread and standard carbon steel rod. It is dimensionally interchangeable with ISO 15552 cylinders such as SMC and Festo equivalents.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw lets you shorten the effective travel from 500 mm down to 480 mm. This mechanical stop fine-tunes the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.