
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X500-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 500mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X500-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 460-500 mm usable travel window by allowing you to trim the 500 mm nominal stroke back by up to 40 mm without adding external stops.
This unit features a carbon steel rod and PT tapered ports. Because it carries the -S magnet option, it supports position sensing via CMSE reed or DMSE electronic solid-state switches fitted into the dual-side sensor grooves. The rear adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X500-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop position when switching product sizes on a line, trimming up to 40 mm off the stroke without mechanical modifications.
Fine-tune the retract travel during machine commissioning to hit precise clearances, using the rear screw rather than swapping to a different stroke cylinder.
Adjust the travel window on the fly for diverting different package sizes on a conveyor, setting the stop anywhere between 460 and 500 mm.
Choose this adjustable-stroke model when you need to fine-tune the retract end position during commissioning or product changeovers, avoiding the need to swap cylinders or bolt on external stoppers. Remember that the rear adjuster only sets the travel end and is not a lock—SAIL or BSAI cylinders are required for true load-holding without live air.
To replace this cylinder per ISO 15552 dimensions, match the 40 mm bore, 500 mm stroke, 40 mm adjustment, PT G1/4 ports, and the -S magnet. With a 500 mm stroke, the 16 mm rod and M12x1.25 thread need careful alignment; an external guide is recommended for unsupported loads to prevent side-load wear on the seals. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At the maximum pressure of 1.0 MPa, it delivers up to 128 kgf.
The rear adjuster screw lets you shorten the 500 mm nominal stroke by up to 40 mm, creating a 460-500 mm usable travel window. It acts as a mechanical stop for end-position tuning and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.