verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X500-75

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X500-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 500mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke500 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$108.16 $115.66Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X500-75

The AirTAC SAIJ40X500-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 425-500mm usable travel window, allowing you to dial back the 500mm nominal stroke by up to 75mm during machine commissioning without adding external stops.

This model uses a standard carbon steel rod and PT tapered port threading (G1/4). The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic sensors if a magnet is added later. It supports a speed range of 30-800mm/s and relies on adjustable air cushions at both ends to decelerate the load.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X500-75 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X500-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke500 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X500-75

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×500Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X500-75 Is Used

tune

Machine Changeover

Dial in the exact retract distance from 425 to 500mm when switching product sizes on a packaging line, avoiding mechanical rebuilds.

conveyor_belt

Variable End-Stop Diverter

Fine-tune the actuation point of a sorting gate without physically swapping the cylinder or bolting on external stopper blocks.

precision_manufacturing

Press Positioning

Precisely set the bottoming position for a light-duty 40mm bore press operation, adjusting the 75mm window on the fly during setup.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X500-75 the Right Cylinder?

The rear adjuster acts purely as a travel stop for fine-tuning the retract end; it is not a locking device. If your process requires the cylinder to hold a load without live air pressure, use an AirTAC SAIL or BSAI cylinder instead.

Because the 500mm stroke is relatively long, the 16mm rod and M12x1.25 thread will experience increased side-loading forces if the load is unsupported. You must use an external guide rail to prevent rod binding. For ISO 15552 interchangeability, match the 40mm bore, 500mm stroke, 75mm adjustment, G1/4 PT port, and standard mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X500-75 FAQ

The rear adjuster screw allows you to shorten the effective stroke by up to 75mm. This creates a usable travel window of 425-500mm, letting you fine-tune the end position at commissioning without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X500-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X500-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.