
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X55-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 55mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X55-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to dial back the nominal 55 mm stroke by up to 10 mm. This creates a precise 45-55 mm usable travel window, enabling fine end-position tuning at commissioning without swapping the cylinder or adding external stops.
Equipped with a 16 mm carbon steel rod and M12x1.25 rod thread, this unit handles side loads well for its size, though long unsupported strokes still need an external guide. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches (requires a -S magnet). It uses a PT tapered port and supports the SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 45-55 mm travel window during commissioning to perfect the final clamping position without adding external stops.
Quickly adjust the retract stop on packaging lines when handling slightly different product sizes on the same conveyor.
Fine-tune the stroke limit during initial machine build to compensate for mechanical tolerances without replacing the cylinder.
The adjustable stroke is ideal for machine setups requiring variable end-stops or product-size changeovers on a line. Unlike a fixed SAI cylinder, the rear screw lets you trim the travel window without hardware changes. For load-holding without live air, select SAIL or BSAI instead, as the rear adjuster here acts only as a travel stop, not a lock. To match this ISO 15552 replacement, verify the 55 mm stroke, 10 mm adjustment, PT port, and mounting style.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
A rear stopper screw lets you shorten the 55 mm nominal stroke by up to 10 mm, creating a 45-55 mm travel window. It acts as a travel stop and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.