
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X55-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 55mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X55-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 45 to 55 mm. The carbon steel rod features an M12x1.25 thread, offering a robust interface for your mechanical linkages.
This unit includes a piston magnet for position detection using AirTAC CMSE reed or DMSE electronic sensors. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible switch mounting. Fluid supply connects via PT G1/4 tapered ports, and the rear stopper mechanism lets you dial in the exact end-of-stroke position during commissioning without adding external stops.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 45 to 55 mm travel distance during machine setup to perfect end-effector positioning without swapping hardware.
Use the rear stopper screw to compensate for mechanical wear or slight misalignment over the life of the equipment.
Quickly adapt the cylinder's effective stroke on a packaging line when processing slightly different product sizes.
The 10 mm adjustment range is perfect for applications needing slight end-position tuning at commissioning rather than a fixed stroke SAI cylinder. For load-holding without continuous air pressure, note that this adjuster acts only as a travel stop; you would need an external rod lock or a SAIL series cylinder instead.
To match this ISO 15552 cylinder as a direct replacement, verify the 40 mm bore, 55 mm nominal stroke, 10 mm adjustment range, PT G1/4 ports, and the -S magnet option. It supports a mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR configurations. Operating speed ranges from 30 to 800 mm/s.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 10 mm, creating a 45 to 55 mm usable travel window. It functions as a travel stop and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.