
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X55-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 55mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X55-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 35 to 55 mm usable travel window. The standard carbon steel rod and M12x1.25 thread provide robust durability for moderate duty cycles.
This model uses a PT tapered G1/4 port and includes variable air cushions at both ends to manage deceleration. The rear adjuster acts purely as a travel stop for fine-tuning end positions during commissioning; it does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-of-stroke position within the 35-55 mm window during initial commissioning without machining external stopper blocks.
Quickly shorten the cylinder's effective travel by up to 20 mm to accommodate slightly different product sizes on the same production line.
Use the rear stopper screw to fine-tune the retraction point, relying on the 30 mm air cushion to absorb the final kinetic energy.
The 20 mm adjustment range is ideal for product changeovers, allowing you to dial back the nominal 55 mm stroke by up to 20 mm without swapping the cylinder or adding external stops. If you need position holding without live air, the rear stopper here is not a lock—you would need to step up to an SAIL or BSAI series cylinder.
For ISO 15552 dimensional interchangeability, match the 40 mm bore, 55 mm nominal stroke, 20 mm adjuster, PT G1/4 port, and the standard carbon steel rod. Mounting options for this adjustable profile cylinder include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the stroke is under 300 mm, side-load stress on the M12x1.25 rod is minimal, though long unsupported loads should still use an external guide.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the nominal 55 mm stroke by up to 20 mm, providing an effective travel window of 35 to 55 mm. It is a travel stop, not a lock, so it cannot hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.