verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-20S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X55-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 55mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke55 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$71.15 $78.65Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-20S

The AirTAC SAIJ40X55-20-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated -S magnet enables position sensing with AirTAC CMSE reed and DMSE electronic sensors. By turning the rear screw, you dial in the effective travel window down to 35 mm from the 55 mm nominal stroke without adding external stops.

This 40 mm bore unit uses a G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread. It includes adjustable air cushions at both ends to decelerate the payload smoothly. The extruded aluminum barrel keeps the frame lightweight while maintaining dimensional interchangeability per ISO 15552. The rear adjuster sets the retract end position but does not lock the load; use a SAIL or BSAI cylinder for pneumatic load-holding without live air.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-20S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X55-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke55 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-20S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×55Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-20S Is Used

tune

Commissioning Fine-Tuning

Dial in the exact retract end-position within the 35-55 mm window during machine setup without swapping out the entire cylinder.

settings_input_component

Product Size Changeover

Quickly adjust the stroke stop on packaging lines when processing different package lengths, minimizing downtime between production runs.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-20S the Right Cylinder?

Choose this adjustable-stroke model when your machine setup requires fine end-position tuning during commissioning or product changeover, avoiding the need to physically swap cylinders to vary the end stop. If you require higher force, moving up to a 50 mm bore provides 982N. To match this SKU exactly for an ISO 15552 replacement, specify the 40 mm bore, 55 mm stroke, 20 mm adjustment range, PT tapered port threads, and the -S magnet option.

The SAIJ series supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles. With a 55 mm stroke, the 16 mm rod is well-supported, but always ensure external guides carry any lateral payload stress.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-20S FAQ

It operates at speeds between 30 and 800 mm/s.

The rear adjuster acts as a travel stop, allowing you to shorten the effective stroke from 55 mm down to 35 mm. It only sets the end position and does not hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X55-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.